TRY OUR FREE

HAZCON300 APP

Hazcon 300 is a great tool that charts hazardous locations’ North American requirements for electrical equipment. The list of electrical equipment covered is extensive:  AC & DC Electrical Machines and Generators,  Cable Glands & Cord Connectors, Circuit Breakers & Molded-Case Switches, Combustible and Toxic Gas Detectors, Tablets & Cellphones, Electrically Operated Valves, Fans and Blowers, Flow Meters, Gas Analyzers, Heating Devices, Industrial Control Equipment, Junction Box & Empty Enclosures, Laboratory Equipment , Measurement and Control Equipment, Linear/ Rotary Actuators, Luminaires (Fixed, Portable, Emergency Exit), Measuring Equipment and Data Recording System, Motor Controller & Auxiliary Devices, Panelboards, Panel PC/ Industrial Computers/ LCD Panel Computers, Power Supplies, DC/DC Convertors, Switch Mode Power Supplies, Process Control Equipment, Safety Barriers, Sensors (Acceleration, Pressure, Temperature, Leakage, Proximity, Density, Ultrasonic, Motion, Vibration, Moisture, Tension, Torque), Surge Protectors, Switches (Pressure & Magnetic Types), Telecommunication Equipment (Radios, Wireless Equipment, Routers, Modems), Temperature Indicating and Regulating Temperature Devices, Transformers, Transmitters and Receivers, and Vacuum Cleaners.

Hazcon 300 helps manufacturers of electrical equipment navigate all the required ordinary locations Standards (Ordloc), hazardous locations Standards (Hazloc), the most common protection techniques, hazloc markings (for both zones and divisions), and installation requirements as per CEC and NEC (NFPA70) and accredited certification agencies in North America. Also, Hazcon 300 lists all the gas groups and the temperature meaning of the T-Classes.

There are, in fact, two classification systems in North America: the Zone System and the Class-division system.  The Zone system of classification originated with the International Electrotechnical Commission (IEC) and is commonly used internationally and in North America. The Class-division system is mainly used in North America, especially in the USA.

Hazcon 300 has links embedded in it that help users assess the scope of each Standard listed in the app to ensure your products are within the scope of the Standards.

Hazcon 300 summarizes essential details in one chart, for hazloc markings for both Zone and Class-division systems in a very organized and smart way which will save time for users.

    Select your product:

    Equipment

    AC & DC Electrical Machines and Generators

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 100-14 Ed. 7

    UL 1004-1-2018 Ed. 2

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4 (XP)

    CSA C22.2 No. 145-11 Ed. 3

    UL 674-2015 Ed. 5

    Class I, Division 1, Groups A, B, C, D; T4; Type X Purge

    OR

    Class I, Division 1, Groups A, B, C, D; T4; Type Y Purge

    NFPA 496-2017

    NFPA 496-2017

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    AC & DC Electrical Machines and Generators

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 100-14 Ed. 7

    UL 1004-1-2018 Ed. 2

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4 (NA)

    CSA C22.2 No. 213-2017

    UL 1836 - 2014

    UL 121201 – 2019 Ed. 9

    Class I, Division 2, Groups A, B, C, D; T4; Type Z Purge

    NFPA 496-2017

    NFPA 496-2017

    Installation Requirements

     CEC 2018

    Annex J18 – Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for the AC & DC Electrical Machines and Generators for installation in Zone 0.

    Equipment

    AC & DC Electrical Machines and Generators

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 100-14 Ed. 7

    ANSI/UL 1004-1-2018 Ed. 2

     

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Increased Safety “eb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex eb IIC T4 Gb

    Class I, Zone 1, AEx eb IIC T4 Gb

    OR

    Zone 1, AEx eb IIC T4 Gb

    Explosion proof “db”

    &

    Increased Safety “eb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex db eb IIC T4 Gb

    Class I, Zone 1, AEx db eb IIC T4 Gb

    OR

    Zone 1, AEx db eb IIC T4 Gb

    Purged & Pressurized “pxb” and/or “pyb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-2:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-2:2017 Ed. 6

    Ex pxb IIC T4 Gb

    Ex pyb IIC T4 Gb

    Class I, Zone 1, AEx pxb IIC T4 Gb

    Class I, Zone 1, AEx pyb IIC T4 Gb

    OR

    Zone 1, AEx pxb IIC T4 Gb

    Zone 1, AEx pyb IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    AC & DC Electrical Machines and Generators

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 100-14 Ed. 7

    ANSI/UL 1004-1-2018 Ed. 2

     

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Non-sparking “nA”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-15: 2012 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL  60079-15:2013 Ed. 4

    Ex nA IIC T4 Gc

    Class I, Zone 2, AEx nA IIC T4 Gc

    OR

    Zone 2, AEx nA IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Cable Glands and Cable Connectors

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 18.3- 2012

    UL 514B – 2012 Ed. 6

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Marking

    Class I, Division 1, Groups A, B, C, D

    C22.2 No. 174 – 2018 Ed. 3

    UL 2225 – 2013 Ed. 4

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Cable Glands and Cable Connectors

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 18.3- 2012

    UL 514B – 2012 Ed. 6

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Technique, and Sample Marking

    Class I, Division 2, Groups A, B, C, D  

    C22.2 No. 174 – 2018 Ed. 3

    UL 2225 – 2013 Ed. 4

    Installation Requirements

     CEC 2018

    Annex J18 – Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for the Cable Glands and Cable Connectors to get Zone 0 marking.  

    Equipment

    Cable Glands and Cable Connectors

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 18.3- 2012

    UL 514B – 2012 Ed. 6

     

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    C22.2 No. 174 – 2018 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 2225 – 2013 Ed. 4

    Ex db IIC Gb

    Class I, Zone 1, AEx db IIC Gb

    OR

    Zone 1, AEx db IIC Gb

    Increased Safety “eb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    C22.2 No. 174 – 2018 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 2225 – 2013 Ed. 4

    Ex eb IIC Gb

    Class I, Zone 1, AEx eb IIC Gb

    OR

    Zone 1, AEx eb IIC Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Cable Glands and Cable Connectors

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 18.3- 2012

    UL 514B – 2012 Ed. 6

     

    “Zone 2” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

     

    Increased Safety “ec”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC Gc

    Class I, Zone 2, AEx ec IIC Gc

    OR

    Zone 2, AEx ec IIC Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Circuit Breakers & Molded-Case Switches

    North America

    CANADA

    USA

    Ordinary Location Standards

    C22.2 No. 5-2016 Ed. 4

    UL 489 – 2016 Ed. 13

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4 (XP)

    CSA C22.2 No. 30 – 2020 Ed. 4

    UL 1203 -2013 Ed. 5

    OR

    FM 3600 - 2018

    FM 3615 - 2018

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    -

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Circuit Breakers & Molded-Case Switches for Class I, Division 2. The requirements of Class I, Division 1 apply. 

    NOTE - There are no protection techniques that can be implemented for Circuit Breakers & Molded-Case Switches for installation in Zone 0.

    Equipment

    Circuit Breakers & Molded-Case Switches

    North America

    CANADA

    USA

    Ordinary Location Standards

    C22.2 No. 5-2016 Ed. 4

    UL 489 – 2016 Ed. 13

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Explosion proof “db” & Increased Safety “eb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex db eb IIC T4 Gb

    Class I, Zone 1, AEx db eb IIC T4 Gb

    OR

    Zone 1, AEx db eb IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    -

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Circuit Breakers & Molded-Case Switches for installation in Zone 2. The requirements of Zone 1 apply.

    Equipment

    Combustible and Toxic Gas Detectors

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    CSA C22.2 No. 152-1984 Ed. 2 (Performance requirement)

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

    ANSI/ISA 60079-29-1:2013

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4 (XP)

    CSA C22.2 No. 30 – 2020 Ed. 4

    UL 1203 -2013 Ed. 5

    OR

    FM 3600 - 2018

    FM 3615 - 2018

    Class I, Division 1, Groups A, B, C, D; T4; (Ex i) – Intrinsic Safety

     

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Installation Requirements

    Explosion Proof:

    CEC 2018

    Annex J18 - Rule J18-106

    Explosion Proof:

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Intrinsically safe installation:

    CEC 2018

    Annex J18 - Rule J18-064

    Intrinsically safe installation:

    NEC 2020 (NFPA70)

    Section 504.10

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Combustible and Toxic Gas Detectors

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    CSA C22.2 No. 152-1984 Ed. 2 (Performance requirement)

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

    ANSI/ISA 60079-29-1:2013

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4; (Ex i) – Intrinsic Safety

     

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Class I, Division 2, Groups A, B, C, D; T4; Non-incendive

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Installation Requirements

     CEC 2018

    Annex J18 – Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Combustible and Toxic Gas Detectors

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    CSA C22.2 No. 152-1984 Ed. 2 (Performance requirement)

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

    ANSI/ISA 60079-29-1:2013

     

    “Zone 0” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Intrinsic Safety “i”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2014 Ed. 6

    Ex ia IIC T4 Ga

    Class I, Zone 0, AEx ia IIC T4 Ga

    OR

    Zone 0, AEx ia IIC T4 Ga

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-090

    NEC 2020 (NFPA70)

    Section 504-10

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Combustible and Toxic Gas Detectors

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    CSA C22.2 No. 152-1984 Ed. 2 (Performance requirement)

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

    ANSI/ISA 60079-29-1:2013

     

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db” &

    Intrinsic Safety “ib”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db ib IIC T4 Gb

    Class I, Zone 1, AEx db ib IIC T4 Gb

    OR

    Zone 1, AEx db ib IIC T4 Gb

    Flame-proof “db” &

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db [ia Ga] IIC T4 Gb

    Class I, Zone 1, AEx db [ia Ga] IIC T4 Gb

    OR

    Zone 1, AEx db [ia Ga] IIC T4 Gb

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

     

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-064 & 18-102

    NEC 2020 (NFPA70)

    Sections 504.10 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Combustible and Toxic Gas Detectors

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    CSA C22.2 No. 152-1984 Ed. 2 (Performance requirement)

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

    ANSI/ISA 60079-29-1:2013

     

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Intrinsic Safety “ic”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex ic IIC T4 Gc

    Class I, Zone 2, AEx ic IIC T4 Gc

    OR

    Zone 2, AEx ic IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-064 & 18-150

    NEC 2020 (NFPA70)

    Sections 504.10 & 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Tablets & Cellphones

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    UL 60950-1:2014 Ed. 2

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4; (Ex i) – Intrinsic Safety

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Tablets & Cellphones

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    UL 60950-1:2014 Ed. 2

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4;

    (Non-incendive and/or Non-arcing)

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

     

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Tablets & Cellphones

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    UL 60950-1:2014 Ed. 2

    “Zone 0” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex ia IIC T4 Ga

    Class I, Zone 0, AEx ia IIC T4 Ga

    OR

    Zone 0, AEx ia IIC T4 Ga

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Tablets & Cellphones

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    UL 60950-1:2014 Ed. 2

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Intrinsic Safety “ib”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex ib IIC T4 Gb

    Class I, Zone 1, AEx ib IIC T4 Gb

    OR

    Zone 1, AEx ib IIC T4 Gb

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Tablets & Cellphones

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    UL 60950-1:2014 Ed. 2

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec” & Intrinsic Safety “ic”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    Ex ec ic IIC T4 Gc

    Class I, Zone 2, AEx ec ic IIC T4 Gc

    OR

    Zone 2, AEx ec ic IIC T4 Gc

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Electrically Operated Valves

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 139: 2019 Ed. 5

    UL 429:2013 Ed. 7

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4 (XP)

    CSA C22.2 No. 30 – 2020 Ed. 4

    UL 1203 -2013 Ed. 5

    OR

    FM 3600 - 2018

    FM 3615 - 2018

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    -

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Electrically Operated Valves

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 139: 2019 Ed. 5

    UL 429:2013 Ed. 7

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4 

    Non-arcing & Non-incendive

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10(B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    -

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Note: There are no protection techniques that can be implemented for Electrically Operated Valves for installation in Zone 0.

    Equipment

    Electrically Operated Valves

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 139: 2019 Ed. 5

    UL 429:2013 Ed. 7

     

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Flame-proof “db” &

    Encapsulation “mb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-18: 2019 Ed. 4

    Ex db mb IIC T4 Gb

    Class I, Zone 1, AEx db mb IIC T4 Gb

    OR

    Zone 1, AEx db mb IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Electrically operated Valves

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 139: 2019 Ed. 5

    UL 429:2013 Ed. 7

     

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Increased Safety “ec” &

    Encapsulation “mc”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-18: 2019 Ed. 4

    Ex ec mc IIC T4 Gc

    Class I, Zone 2, AEx ec mc IIC T4 Gc

    OR

    Zone 2, AEx ec mc IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Fans and Blowers

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 113:2018

    UL 507: 2017 Ed. 10

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4 (XP)

    CSA C22.2 No. 30 – 2020 Ed. 4

    UL 1203 -2013 Ed. 5

    OR

    FM 3600 - 2018

    FM 3615 - 2018

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Fans and Blowers

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 113:2018

    UL 507: 2017 Ed. 10

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4 (Non-arcing)

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Fans and Blowers for installation in Zone 0.

    Equipment

    Fans and Blowers

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 113:2018

    UL 507: 2017 Ed. 10

     

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Fans and Blowers

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 113:2018

    UL 507: 2017 Ed. 10

     

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Non-Arcing “nA”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-15: 2016 Ed. 4

    UL 60079-0:2019 Ed. 7

    UL 60079-15:2013 Ed. 4

    Ex nA IIC T4 Gc

    Class I, Zone 2, AEx nA IIC T4 Gc

    OR

    Zone 2, AEx nA IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Flashlights and Lanterns

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 250.4- 2020 Ed. 2

    UL 1576-2018 Ed. 1

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4; (Ex i) – Intrinsic Safety

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Flashlights and Lanterns

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 250.4- 2020 Ed. 2

    UL 1576-2018 Ed. 1

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4;

    Non-arcing & Non-incendive

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    UL 783-2016 Ed. 6

     

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Flashlights and Lanterns

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 250.4- 2020 Ed. 2

    UL 1576-2018 Ed. 1

    “Zone 0” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex ia IIC T4 Ga

    Class I, Zone 0, AEx ia IIC T4 Ga

    OR

    Zone 0, AEx ia IIC T4 Ga

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Flashlights and Lanterns

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 250.4- 2020 Ed. 2

    UL 1576-2018 Ed. 1

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Intrinsic Safety “ib”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex ib IIC T4 Gb

    Class I, Zone 1, AEx ib IIC T4 Gb

    OR

    Zone 1, AEx ib IIC T4 Gb

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Flashlights and Lanterns

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 250.4- 2020 Ed. 2

    UL 1576-2018 Ed. 1

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Intrinsic Safety “ic” &

    Increased Safety “ec”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    Ex ec ic IIC T4 Gc

    Class I, Zone 2, AEx ec ic IIC T4 Gc

    OR

    Zone 2, AEx ec ic IIC T4 Gc

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Flow Meters

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4 (XP & IS)

    CSA C22.2 No. 30 – 2020 Ed. 4

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 1203 -2013 Ed. 5

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Flow Meters

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4; Non-incendive & Non-arcing

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Installation Requirements

     CEC 2018

    Annex J18 – Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Flow Meters

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

     

    “Zone 0” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

     

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex ia IIC T4 Ga

    Class I, Zone 0, AEx ia IIC T4 Ga

    OR

    Zone 0, AEx ia IIC T4 Ga

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-090

    NEC 2020 (NFPA70)

    Section 504-10

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Flow Meters

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

     

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Flame-proof “db” &

    Intrinsic Safety “ib”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db ib IIC T4 Gb

    Class I, Zone 1, AEx db ib IIC T4 Gb

    OR

    Zone 1, AEx db ib IIC T4 Gb

    Flame-proof “db”

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db [ia Ga] IIC T4 Gb

    Class I, Zone 1, AEx db [ia Ga] IIC T4 Gb

    OR

    Zone 1, AEx db [ia Ga] IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-064 & 18-102

    NEC 2020 (NFPA70)

    Sections 504.10 & 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Flow Meters

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

     

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Intrinsic Safety “ic”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex ic IIC T4 Gc

    Class I, Zone 2, AEx ic IIC T4 Gc

    OR

    Zone 2, AEx ic IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 –18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Gas Analyzer

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4 with an IS output

    CSA C22.2 No. 30 – 2020 Ed. 4

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 1203 -2013 Ed. 5

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Class I, Division 1, Groups A, B, C, D; T4 Purged & Pressurized (Type X or Y)

    NFPA 496-2017

    NFPA 496-2017

    Class I, Division 1, Groups A, B, C, D; T4 Purged & Pressurized Type X or Y with an IS output

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    NFPA 496-2017

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    NFPA 496-2017

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Gas Analyzer

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4; (Ex i) – Non-incendive

     

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Class I, Division 2, Groups A, B, C, D; T4; Purged & Pressurized Type Z

    NFPA 496-2017

    NFPA 496-2017

    Class I, Division 2, Groups A, B, C, D; T4; Purged & Pressurized Type Z

    With Non-incendive outputs

    CSA C22.2 No. 213-2017

    NFPA 496-2017

    UL 121201 – 2019 Ed. 9

    NFPA 496-2017

    Installation Requirements

     CEC 2018

    Annex J18 – Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Gas Analyzers for installation in Zone 0.

    Equipment

    Gas Analyzer

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

     

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db” &

    Intrinsic Safety “ib”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db ib IIC T4 Gb

    Class I, Zone 1, AEx db ib IIC T4 Gb

    OR

    Zone 1, AEx db ib IIC T4 Gb

    Purged & Pressurized “pxb” & Flame-proof “db” & Intrinsic Safety “ib”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-2:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-2:2017 Ed. 6

    UL 60079-11: 2018 Ed. 6

    Ex db ib pxb IIC T4 Gb

    Class I, Zone 1, AEx db ib pxb IIC T4 Gb

    OR

    Zone 1, AEx db ib pxb IIC T4 Gb

    Flame-proof “db” &

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db [ia Ga] T4 Gb

    Class I, Zone 1, AEx db [ia Ga] IIC T4 Gb

    OR

    Zone 1, AEx db [ia Ga] IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-064 & 18-102

    NEC 2020 (NFPA70)

    Sections 504.10 & 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Gas Analyzer

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

     

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Increased Safety “ec” &

    Intrinsic Safety “ic”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    Ex ec ic IIC T4 Gc

    Class I, Zone 2, AEx ec ic IIC T4 Gc

    OR

    Zone 2, AEx ec ic IIC T4 Gc

    Purged & Pressurized “pzc”& Intrinsic Safety “ic”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-2:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-2:2017 Ed. 6

    UL 60079-11: 2018 Ed. 6

    Ex ic pzc IIC T4 Gc

    Class I, Zone 2, AEx ic pzc IIC T4 Gc

    OR

    Zone 2, AEx ic pzc IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-064 & 18-102

    NEC 2020 (NFPA70)

    Sections 504.10 & 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Heating Devices (electric heaters, electric air heaters, electric hot-water or steam radiators, and electric hot plates)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 72-10 Ed. 3

    CSA C22.2 No. 130-2016 Ed. 4

    UL 1030-2019 Ed. 8

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4

    (XP)

    CSA C22.2 No. 30 – 2020 Ed. 4

    UL 1203 -2013 Ed. 5

    UL 823-2019 Ed. 9

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Heating Devices (electric heaters, electric air heaters, electric hot-water or steam radiators, and electric hot plates)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 46 – 2013 Ed. 9

    CSA C22.2 No. 72-10 Ed. 3

    CSA C22.2 No. 130-2016 Ed. 4

    UL 1030-2019 Ed. 8

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4

    Non-arcing

    UL 823-2019 Ed. 9

    UL 823-2019 Ed. 9

    Installation Requirements

     CEC 2018

    Annex J18 – Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Heating Devices for installation in Zone 0.

    Equipment

    Resistance Heating Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 46 – 2013 Ed. 9

    CSA C22.2 No. 72-10 Ed. 3

    CSA C22.2 No. 130-2016 Ed. 4

    UL 1030-2019 Ed. 8

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Increased Safety “eb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex eb IIC T4 Gb

    Class I, Zone 1, AEx eb IIC T4 Gb

    OR

    Zone 1, AEx eb IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Resistance Heating Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 46 – 2013 Ed. 9

    CSA C22.2 No. 72-10 Ed. 3

    CSA C22.2 No. 130-2016 Ed. 4

    UL 1030-2019 Ed. 8

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Increased Safety “ec”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Industrial Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 14-2018

    UL 508-2018

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4

    (XP)

    CSA C22.2 No. 30 – 2020 Ed. 4

    UL 1203 -2013 Ed. 5

    Class I, Division 1, Groups A, B, C, D; T4; Type X Purge

    OR

    Class I, Division 1, Groups A, B, C, D; T4; Type Y Purge

    NFPA 496-2017

    NFPA 496-2017

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Industrial Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 14-2018

    UL 508-2018

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4

    Enclosed-break

    Hermetically-sealed

    Nonincendive

    Non-sparking

    Oil immersed

    CSA C22.2 No. 213-2017

     

    UL 121201 – 2019 Ed. 9

     

    Class I, Division 2, Groups A, B, C, D; T4; Type Z Purge

    NFPA 496-2017

    NFPA 496-2017

    Class I, Division 2, Groups A, B, C, D; T4; Type Z Purge with Non-incendive outputs

    CSA C22.2 No. 213-2017

    NFPA 496-2017

    UL 121201 – 2019 Ed. 9

    NFPA 496-2017

     

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Industrial Control Equipment for installation in Zone 0.

    Equipment

    Industrial Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 14-2018

    UL 508-2018

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Flame-proof “db” &

    Encapsulation “mb”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-18: 2019 Ed. 4

    Ex db mb IIC T4 Gb

    Class I, Zone 1, AEx db mb IIC T4 Gb

    OR

    Zone 1, AEx db mb IIC T4 Gb

    Purged & Pressurized “pxb” or “pyb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-2:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-2:2017 Ed. 6

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Industrial Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 14-2018

    UL 508-2018

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec” &

    Sealed Devices “nC”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-15: 2018 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-15:2020 Ed. 5

    Ex ec nC IIC T4 Gc

    Class I, Zone 2, AEx ec nC IIC T4 Gc

    OR

    Zone 2, AEx ec nC IIC T4 Gc

    Encapsulation “mc”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-18: 2019 Ed. 4

    Ex mc IIC T4 Gc

    Class I, Zone 2, AEx mc IIC T4 Gc

    OR

    Zone 2, AEx mc IIC T4 Gc

    Purged & Pressurized “pzc”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-2:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-2:2017 Ed. 6

    Ex pzc IIC T4 Gc

    Class I, Zone 2, AEx pzc IIC T4 Gc

    OR

    Zone 2, AEx pzc IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Junction Box & Empty Enclosures

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    Type Rating

    CSA C22.2 No. 94.2- 2015 Ed. 2

    UL 50E-2015 Ed. 2

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Marking

    Class I, Division 1, Groups A, B, C, D; (XP)

    CSA C22.2 No. 30 – 2020 Ed. 4

    UL 1203 -2013 Ed. 5

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Junction Box & Empty Enclosures for Class I, Division 2. General or special purpose enclosures complying with Standards CSA C22.2 No. 94.2 for Canada and UL 50E for the USA can be used.

    NOTE - There are no protection techniques that can be implemented for Junction Box & Empty Enclosures for installation in Zone 0.

    Equipment

    Junction Box & Empty Enclosures

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    Type Rating

    CSA C22.2 No. 94.2- 2015 Ed. 2

    UL 50E-2015 Ed. 2

     

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC Gb

    Class I, Zone 1, AEx db IIC Gb

    OR

    Zone 1, AEx db IIC Gb

    Increased Safety “eb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex eb IIC Gb

    Class I, Zone 1, AEx eb IIC Gb

    OR

    Zone 1, AEx eb IIC Gb

    Installation Requirements

    CEC 2018

    Section 18 –18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Industrial Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    Type Rating

    CSA C22.2 No. 94.2- 2015 Ed. 2

    UL 50E-2015 Ed. 2

     

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Marking

     

    Increased Safety “ec”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC Gc

    Class I, Zone 2, AEx ec IIC Gc

    OR

    Zone 2, AEx ec IIC Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Laboratory, Measurement, and Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4 (XP)

    CSA C22.2 No. 30 – 2020 Ed. 4

    UL 1203 -2013 Ed. 5

    Class I, Division 1, Groups A, B, C, D; T4; (Ex i) – Intrinsic Safety

     

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Class I, Division 1, Groups A, B, C, D; T4 Purged & Pressurized (Type X or Y)

    NFPA 496-2017

    NFPA 496-2017

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Laboratory, Measurement, and Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4; Enclosed-break

    Hermetically-sealed

    Nonincendive

    Non-sparking

    Oil immersed

    Sealed devices

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Class I, Division 2, Groups A, B, C, D; T4; Purged & Pressurized Type Z

    NFPA 496-2017

    NFPA 496-2017

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Laboratory, Measurement, and Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Zone 0” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex ia IIC T4 Ga

    Class I, Zone 0, AEx ia IIC T4 Ga

    OR

    Zone 0, AEx ia IIC T4 Ga

    Intrinsic Safety “ia” &

    Optical Radiation “op is”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    CSA C22.2 No. 60079-28:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    UL 60079-28:2017 Ed. 2   

    Ex ia op is IIC T4 Ga

    Class I, Zone 0, AEx ia op is IIC T4 Ga

    OR

    Zone 0, AEx ia op is IIC T4 Ga

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-064

    NEC 2020 (NFPA70)

    Section 504.10

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Laboratory, Measurement, and Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Flame-proof “db” &

    Intrinsic Safety “ib”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db ib IIC T4 Gb

    Class I, Zone 1, AEx db ib IIC T4 Gb

    OR

    Zone 1, AEx db ib IIC T4 Gb

    Flame-proof “db”

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db [ia Ga] T4 Gb

    Class I, Zone 1, AEx db [ia Ga] IIC T4 Gb

    OR

    Zone 1, AEx db [ia Ga] IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-064 & 18-102

    NEC 2020 (NFPA70)

    Section 504.10

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Laboratory, Measurement, and Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Intrinsic Safety “ic”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex ic IIC T4 Gc

    Class I, Zone 2, AEx ic IIC T4 Gc

    OR

    Zone 2, AEx ic IIC T4 Gc

    Increased Safety ‘ec’ & Intrinsic Safety ‘ic’ &

    Sealed Device ‘nC’

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    CSA C22.2 No. 60079-15: 2018 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    UL 60079-15:2020 Ed. 5

    Ex ec ic nC IIC T4 Gc

    Class I, Zone 2, AEx ec ic nC IIC T4 Gc

    OR

    Zone 2, AEx ec ic nC IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-064 & 18-150

    NEC 2020 (NFPA70)

    Section 504.10

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Linear/ Rotary Actuators

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 139-2019 Ed. 5

    UL 429-2013 Ed.7

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Marking

    Class I, Division 1, Groups A, B, C, D; T4 (XP)

    CSA C22.2 No. 30 – 2020 Ed. 4

    UL 1203 -2013 Ed. 5

    OR

    FM 3600 - 2018

    FM 3615 - 2018

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Linear/ Rotary Actuators

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 139-2019 Ed. 5

    UL 429-2013 Ed.7

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Marking

    Class I, Division 2, Groups A, B, C, D; T4; Non-arcing

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Installation Requirements

     CEC 2018

    Annex J18 – Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Linear/ Rotary Actuators for installation in Zone 0.

    Equipment

    Linear/ Rotary Actuators

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 139: 2019 Ed. 5

    UL 429:2013 Ed. 7

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Flame-proof “db” &

    Encapsulation “mb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-18: 2019 Ed. 4

    Ex db mb IIC T4 Gb

    Class I, Zone 1, AEx db mb IIC T4 Gb

    OR

    Zone 1, AEx db mb IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Linear/ Rotary Actuators

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 139: 2019 Ed. 5

    UL 429:2013 Ed. 7

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Luminaires (Fixed, Portable, Emergency Exit)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 250.0-18 Ed. 4

    CSA C22.2 No. 250.4-2020 Ed. 2 (Portable)

    CSA C22.2 No. 141-2015 Ed. 4 (Emergency Lighting equipment)

    UL 1598-2018 Ed. 4

    UL 153-2018 Ed. 13 (Portable)

    UL 924-2018 Ed. 10 (Emergency Lighting equipment)

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Marking

    Class I, Division 1, Groups A, B, C, D; T4 (XP)

    CSA C22.2 No. 137-2018 Ed. 2

    UL 844-2019 Ed. 13

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Luminaires (Fixed, Portable, Emergency Exit)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 250.0-18 Ed. 4

    CSA C22.2 No. 250.4-2020 Ed. 2 (Portable)

    CSA C22.2 No. 141-2015 Ed. 4 (Emergency Lighting equipment)

    UL 1598-2018 Ed. 4

    UL 153-2018 Ed. 13 (Portable)

    UL 924-2018 Ed. 10 (Emergency Lighting equipment)

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Marking

    Class I, Division 2, Groups A, B, C, D; T4

    Non-arcing & Non-incendive

    CSA C22.2 No. 137-2018 Ed. 2

    CSA C22.2 No. 213-2017

    UL 844-2019 Ed. 13

    UL 121201 – 2019 Ed. 9

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Luminaires (Fixed, Portable, Emergency Exit) for installation in Zone 0.

    Equipment

    Luminaires (Fixed, Portable, Emergency Exit)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 250.0-18 Ed. 4

    CSA C22.2 No. 250.4-2020 Ed. 2 (Portable)

    CSA C22.2 No. 141-2015 Ed. 4 (Emergency Lighting equipment)

    UL 1598-2018 Ed. 4

    UL 153-2018 Ed. 13 (Portable)

    UL 924-2018 Ed. 10 (Emergency Lighting equipment)

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Flame-proof “db” &

    Encapsulation “mb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-18: 2019 Ed. 4

    Ex db mb IIC T4 Gb

    Class I, Zone 1, AEx db mb IIC T4 Gb

    OR

    Zone 1, AEx db mb IIC T4 Gb

    Explosion proof “db” & Increased Safety “eb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex db eb IIC T4 Gb

    Class I, Zone 1, AEx db eb IIC T4 Gb

    OR

    Zone 1, AEx db eb IIC T4 Gb

    Flame-proof “db” &

    Encapsulation “mb” &

    Increased Safety “eb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-18: 2019 Ed. 4

    Ex eb db mb IIC T4 Gb

    Class I, Zone 1, AEx eb db mb IIC T4 Gb

    OR

    Zone 1, AEx eb db mb IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Luminaires (Fixed, Portable, Emergency Exit)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 250.0-18 Ed. 4

    CSA C22.2 No. 250.4-2020 Ed. 2 (Portable)

    CSA C22.2 No. 141-2015 Ed. 4 (Emergency Lighting equipment)

    UL 1598-2018 Ed. 4

    UL 153-2018 Ed. 13 (Portable)

    UL 924-2018 Ed. 10 (Emergency Lighting equipment)

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Increased Safety “ec” &

    Encapsulation “mc”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-18: 2019 Ed. 4

    Ex ec mc IIC T4 Gc

    Class I, Zone 2, AEx ec mc IIC T4 Gc

    OR

    Zone 2, AEx ec mc IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Luminaires (Fixed, Portable, Emergency Exit)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 250.0-18 Ed. 4

    CSA C22.2 No. 250.4-2020 Ed. 2 (Portable)

    CSA C22.2 No. 141-2015 Ed. 4 (Emergency Lighting equipment)

    UL 1598-2018 Ed. 4

    UL 153-2018 Ed. 13 (Portable)

    UL 924-2018 Ed. 10 (Emergency Lighting equipment)

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Increased Safety “ec” &

    Encapsulation “mc”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-18: 2019 Ed. 4

    Ex ec mc IIC T4 Gc

    Class I, Zone 2, AEx ec mc IIC T4 Gc

    OR

    Zone 2, AEx ec mc IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Measuring Equipment and Data Recording System

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4

    Enclosed-break

    Hermetically-sealed

    Nonincendive

    Non-sparking

    Sealed devices

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Class I, Division 2, Groups A, B, C, D; T4

    Purged & Pressurized, Type Z

    NFPA 496-2017

    NFPA 496-2017

    Installation Requirements

     CEC 2018

    Annex J18 – Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Measuring Equipment and Data Recording System

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

    “Zone 0” Hazardous Locations, Standards, Common Protection Techniques, and Sample Marking

     

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2014 Ed. 6

    Ex ia IIC T4 Ga

    Class I, Zone 0, AEx ia IIC T4 Ga

    OR

    Zone 0, AEx ia IIC T4 Ga

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-090

    NEC 2020 (NFPA70)

    Section 504-10

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Measuring Equipment and Data Recording System

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db” &

    Intrinsic Safety “ib”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db ib IIC T4 Gb

    Class I, Zone 1, AEx db ib IIC T4 Gb

    OR

    Zone 1, AEx db ib IIC T4 Gb

    Flame-proof “db” &

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db [ia Ga] IIC T4 Gb

    Class I, Zone 1, AEx db [ia Ga] IIC T4 Gb

    OR

    Zone 1, AEx db [ia Ga] IIC T4 Gb

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

     

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Increased Safety “eb”  &

    Intrinsic Safety “ib”

    &

    Encapsulation “mb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    UL 60079-18: 2019 Ed. 4

    Ex eb mb ib IIC T4 Gb

    Class I, Zone 1, AEx eb mb ib IIC T4 Gb

    OR

    Zone 1, AEx eb mb ib IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Measuring Equipment and Data Recording System

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Increased Safety “ec” &

    Encapsulation “mc”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-18: 2019 Ed. 4

    Ex ec mc IIC T4 Gc

    Class I, Zone 2, AEx ec mc IIC T4 Gc

    OR

    Zone 2, AEx ec mc IIC T4 Gc

    Intrinsic Safety “ic”

    &

    Increased Safety “ec”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    Ex ec ic IIC T4 Gc

    Class I, Zone 2, AEx ec ic IIC T4 Gc

    OR

    Zone 2, AEx ec ic IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Motor Controller & Auxiliary Devices

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 14-2018

    UL 508-2018

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4  (XP)

    CSA C22.2 No. 30 – 2020 Ed. 4

    UL 1203 -2013 Ed. 5

    Class I, Division 1, Groups A, B, C, D; T4; Type X Purge

    OR

    Class I, Division 1, Groups A, B, C, D; T4; Type Y Purge

    NFPA 496-2017

    NFPA 496-2017

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Motor Controller & Auxiliary Devices

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 14-2018

    UL 508-2018

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4

    Enclosed-break

    Hermetically-sealed

    Non-incendive

    Oil immersed

    Sealed devices

    CSA C22.2 No. 213-2017

     

    UL 121201 – 2019 Ed. 9

     

    Class I, Division 2, Groups A, B, C, D; T4; Type Z Purge

    NFPA 496-2017

    NFPA 496-2017

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Motor Controller & Auxiliary Devices for installation in Zone 0.

    Equipment

    Motor Controller & Auxiliary Devices

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 14-2018

    UL 508-2018

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Explosion proof “db”

    &

    Increased Safety “eb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex db eb IIC T4 Gb

    Class I, Zone 1, AEx db eb IIC T4 Gb

    OR

    Zone 1, AEx db eb IIC T4 Gb

    Purged & Pressurized “pxb” & “pyb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-2:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-2:2017 Ed. 6

    Ex pxb IIC T4 Gb

    Ex pyb IIC T4 Gb

    Class I, Zone 1, AEx pxb IIC T4 Gb

    Class I, Zone 1, AEx pyb IIC T4 Gb

    OR

    Zone 1, AEx pxb IIC T4 Gb

    Zone 1, AEx pyb IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Motor Controller & Auxiliary Devices

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 14-2018

    UL 508-2018

     

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

    &

    Intrinsic Safety “ic”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    Ex ec ic IIC T4 Gc

    Class I, Zone 2, AEx ec ic IIC T4 Gc

    OR

    Zone 2, AEx ec ic IIC T4 Gc

    Purged & Pressurized “pzc”

    &

    Intrinsic Safety “ic”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-2:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-2:2017 Ed. 6

    UL 60079-11: 2018 Ed. 6

    Ex ic pzc IIC T4 Gc

    Class I, Zone 2, AEx ic pzc IIC T4 Gc

    OR

    Zone 2, AEx ic pzc IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-064 & 18-150

    NEC 2020 (NFPA70)

    Sections 504.10 & 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Panelboards

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 29-2015 Ed. 6

    UL 67 – 2019 Ed. 13

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4 w

    CSA C22.2 No. 30 – 2020 Ed. 4

     

    UL 1203 -2013 Ed. 5

     

    Class I, Division 1, Groups A, B, C, D; T4 Purged & Pressurized (Type X or Y)

    NFPA 496-2017

    NFPA 496-2017

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Panelboards

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 29-2015 Ed. 6

    UL 67 – 2019 Ed. 13

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4 (XP)

     

    Note: Protection technique used for Class I, Division 1 can be implemented for Panelboards to be installed in a Division 2 area.

    CSA C22.2 No. 30 – 2020 Ed. 4

     

    UL 1203 -2013 Ed. 5

     

    Class I, Division 2, Groups A, B, C, D; T4 Purged & Pressurized Type Z

    NFPA 496-2017

    NFPA 496-2017

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Panelboards for installation in Zone 0.

    Equipment

    Panelboards

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 29-2015 Ed. 6

    UL 67 – 2019 Ed. 13

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Explosion proof “db”

    &

    Increased Safety “eb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex db eb IIC T4 Gb

    Class I, Zone 1, AEx db eb IIC T4 Gb

    OR

    Zone 1, AEx db eb IIC T4 Gb

    Purged & Pressurized “pxb” and/or “pyb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-2:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-2:2017 Ed. 6

    Ex pxb IIC T4 Gb

    Ex pyb IIC T4 Gb

    Class I, Zone 1, AEx pxb IIC T4 Gb

    Class I, Zone 1, AEx pyb IIC T4 Gb

    OR

    Zone 1, AEx pxb IIC T4 Gb

    Zone 1, AEx pyb IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Panelboards

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 29-2015 Ed. 6

    UL 67 – 2019 Ed. 13

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-Proof “db”

    &

    Increased Safety “ec”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex db ec IIC T4 Gc

    Class I, Zone 1, AEx db ec IIC T4 Gc

    OR

    Zone 1, AEx db ec IIC T4 Gc

    Purged & Pressurized “pzc”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-2:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-2:2017 Ed. 6

    Ex pzc IIC T4 Gc

     

    Class I, Zone 2, AEx pzc IIC T4 Gc

    OR

    Zone 2, AEx pzc IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Panel PC/ Industrial Computer/ LCD Panel Computer

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    UL 60950-1:2014 Ed. 2

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Marking

    Note: There are no unique protection techniques that can be implemented for Panel PC/ Industrial Computer/ LCD Panel Computer to get Class I, division 1 marking. Panel PC/ Industrial Computer/ LCD Panel Computer need to be installed in an explosion proof enclosure or pressurized equipment.

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Panel PC/ Industrial Computer/ LCD Panel Computer

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    UL 60950-1:2014 Ed. 2

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4; Purged & Pressurized Type Z

    NFPA 496-2017

    NFPA 496-2017

    Class I, Division 2, Groups A, B, C, D; T4

    Hermetically-sealed

    Nonincendive

    Non-sparking

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Panel PC/ Industrial Computers/ LCD Panel Computers for installation in Zone 0.

    Equipment

    Panel PC/ Industrial Computer/ LCD Panel Computer

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    UL 60950-1:2014 Ed. 2

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Note: There are no unique protection techniques that can be implemented for Panel PC/ Industrial Computer/ LCD Panel Computer to get Zone 1 marking. Panel PC/ Industrial Computer/ LCD Panel Computer need to be installed in an explosion proof enclosure or pressurized equipment.

    Installation Requirements

    CEC 2018

    Section 18 – 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Panel PC/ Industrial Computer/ LCD Panel Computer

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    UL 60950-1:2014 Ed. 2

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

    &

    Intrinsic Safety “ic”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    Ex ec ic IIC T4 Gc

    Class I, Zone 2, AEx ec ic IIC T4 Gc

    OR

    Zone 2, AEx ec ic IIC T4 Gc

    Purged & Pressurized “pzc”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-2:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-2:2017 Ed. 6

    Ex pzc IIC T4 Gc

    Class I, Zone 2, AEx pzc IIC T4 Gc

    OR

    Zone 2, AEx pzc IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Power Supply, DC/DC Convertor, Switch Mode Power Supply

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    OR

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 60950-1:2014 Ed. 2

    OR

    UL 61010-1:2019 Ed. 3

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4

     

    Note: These equipment  need to be installed in an explosion proof enclosure or pressurized equipment.

    CSA C22.2 No. 30 – 2020 Ed. 4

     

    UL 1203 -2013 Ed. 5

     

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Power supply, DC/DC Convertor, Switch Mode Power Supply

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    OR

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 60950-1:2014 Ed. 2

    OR

    UL 61010-1:2019 Ed. 3

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4

    Hermetically-sealed

    Nonincendive

    Non-sparking

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Power supply, DC/DC convertor, Switch Mode Power Supply for installation in Zone 0.

    Equipment

    Power supply, DC/DC Convertor, Switch Mode Power Supply

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    OR

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 60950-1:2014 Ed. 2

    OR

    UL 61010-1:2019 Ed. 3

     

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Power supply, DC/DC Convertor, Switch Mode Power Supply

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA-C22.2 No. 60950-1: 2016 Ed. 2

    OR

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 60950-1:2014 Ed. 2

    OR

    UL 61010-1:2019 Ed. 3

     

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

    &

    Intrinsic Safety “ic”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    Ex ec ic IIC T4 Gc

    Class I, Zone 2, AEx ec ic IIC T4 Gc

    OR

    Zone 2, AEx ec ic IIC T4 Gc

    Increased Safety ‘ec’

    &

    Sealed Device ‘nC’

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-15: 2018 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-15:2020 Ed. 5

    Ex ec nC IIC T4 Gc

    Class I, Zone 2, AEx ec nC IIC T4 Gc

    OR

    Zone 2, AEx ec nC IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Process Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4 (XP)

    CSA C22.2 No. 30 – 2020 Ed. 4

     

    UL 1203 -2013 Ed. 5

     

    Class I, Division 1, Groups A, B, C, D; T4 (Ex ia)

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Class I, Division 1, Groups A, B, C, D; T4 (XP with IS outputs)

    CSA C22.2 No. 30 – 2020 Ed. 4

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 1203 -2013 Ed. 5

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Process Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4

    Hermetically-sealed

    Nonincendive

    Non-sparking

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Process Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex ia IIC T4 Ga

    Class I, Zone 0, AEx ia IIC T4 Ga

    OR

    Zone 0, AEx ia IIC T4 Ga

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Process Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

    &

    Intrinsic Safety “ib”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db ib IIC T4 Gb

    Class I, Zone 1, AEx db ib IIC T4 Gb

    OR

    Zone 1, AEx db ib IIC T4 Gb

    Flame-proof “db”

    &

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db [ia Ga] IIC T4 Gb

    Class I, Zone 1, AEx db [ia Ga] IIC T4 Gb

    OR

    Zone 1, AEx db [ia Ga] IIC T4 Gb

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

     

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Increased Safety “eb”

    &

    Intrinsic Safety “ib”

    &

    Encapsulation “mb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    UL 60079-18: 2019 Ed. 4

     

    Ex eb mb ib IIC T4 Gb

    Class I, Zone 1, AEx eb mb ib IIC T4 Gb

    OR

    Zone 1, AEx eb mb ib IIC T4 Gb

    Intrinsic Safety “ib”

    &

    Encapsulation “mb”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    UL 60079-18: 2019 Ed. 4

    Ex mb ib IIC T4 Gb

    Class I, Zone 1, AEx mb ib IIC T4 Gb

    OR

    Zone 1, AEx mb ib IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Process Control Equipment

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

    &

    Encapsulation “mc”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-18: 2019 Ed. 4

    Ex ec mc IIC T4 Gc

    Class I, Zone 2, AEx ec mc IIC T4 Gc

    OR

    Zone 2, AEx ec mc IIC T4 Gc

    Increased Safety “ec”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Intrinsic Safety “ic”

    &

    Increased safety “ec”

    &

    Sealed Devices “nC”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    CSA C22.2 No. 60079-15: 2012 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    UL  60079-15:2013 Ed. 4

    Ex ec ic nC IIC T4 Gc

    Class I, Zone 2, AEx ec ic nC IIC T4 Gc

    OR

    Zone 2, AEx ec ic nC IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Safety Barriers

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    “ASSOCIATED EQUIPMENT”

    OR

    “ASSOCIATED APPARATUS,”

    OR

    The symbol “[Ex ia]”

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Safety Barriers

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    “ASSOCIATED EQUIPMENT”

    Class I, Division 2, Groups A, B, C, D; T4 with IS Outputs

     

    CSA C22.2 No. 213-2017

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 121201 – 2019 Ed. 9

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    NOTE - There are no protection techniques that can be implemented for Safety Barriers for installation in Zone 0.

    Equipment

    Safety Barriers

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Zone 0 and 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Intrinsic safety “i”

    Associated Apparatus for installation in a safe area with IS outputs for Zones 0 and 1.

     

    Note: Not allowed to be installed in Zone 1 unless another protection technique is used (e.g. by installation inside an explosion proof enclosure).

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2014 Ed. 6

    [Ex ia Ga] IIC

    [Ex ib Gb] IIC

    [Ex ia Ga] IIC

    [Ex ib Gb] IIC

     

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Safety Barriers

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Increased Safety “ec”

    &

    Intrinsic Safety “ic”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    Ex ec [ia Ga] IIC T4 Gc

    Class I, Zone 2, AEx ec [ia Ga] IIC T4 Gc

    OR

    Zone 2, AEx ec [ia Ga] IIC T4 Gc

    Increased Safety “ec”

    &

    Intrinsic Safety “ic”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex ec ic IIC T4 Gc

    Class I, Zone 2, AEx ec ic IIC T4 Gc

    OR

    Zone 2, AEx ec ic IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Electrical Sensors (e.g. Acceleration, Pressure, Temperature, Leakage, Proximity, Density, Ultrasonic, Motion, Vibration, Moisture, Tension, Torque)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6

    Installation Requirements

    CEC 2018

    Annex J18 - Rule J18-106

    NEC 2020 (NFPA70)

    Section 501.10 (A)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Electrical Sensors (e.g. Acceleration, Pressure, Temperature, Leakage, Proximity, Density, Ultrasonic, Motion, Vibration, Moisture, Tension, Torque)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

    Class I, Division 2, Groups A, B, C, D; T4

    Hermetically-sealed

    Nonincendive

    Non-sparking

    Sealed devices

    CSA C22.2 No. 213-2017

    UL 121201 – 2019 Ed. 9

    Installation Requirements

     CEC 2018

    Annex J18 – Rule J18-150

    NEC 2020 (NFPA70)

    Section 501.10 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    A

    Acetylene

    B

    Hydrogen

    C

    Ethylene

    D

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4A

    120°C

    T4

    135°C

    T3C

    160°C

    T3B

    165°C

    T3A

    180°C

    T3

    200°C

    T2D

    215°C

    T2C

    230°C

    T2B

    260°C

    T2A

    280°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Electrical Sensors (e.g. Acceleration, Pressure, Temperature, Leakage, Proximity, Density, Ultrasonic, Motion, Vibration, Moisture, Tension, Torque)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

     

    “Zone 0” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-11: 2014 Ed. 6

    Ex ia IIC T4 Ga

    Class I, Zone 0, AEx ia IIC T4 Ga

    OR

    Zone 0, AEx ia IIC T4 Ga

    Installation Requirements

    CEC 2018

    Section 18 – Rule 18-090

    NEC 2020 (NFPA70)

    Section 504-10

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Electrical Sensors (e.g. Acceleration, Pressure, Temperature, Leakage, Proximity, Density, Ultrasonic, Motion, Vibration, Moisture, Tension, Torque)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

    “Zone 1” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Flame-proof “db”

    &

    Intrinsic Safety “ib”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db ib IIC T4 Gb

    Class I, Zone 1, AEx db ib IIC T4 Gb

    OR

    Zone 1, AEx db ib IIC T4 Gb

    Flame-proof “db”

    &

    Intrinsic Safety “ia”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    UL 60079-11: 2018 Ed. 6

    Ex db [ia Ga] IIC T4 Gb

    Class I, Zone 1, AEx db [ia Ga] IIC T4 Gb

    OR

    Zone 1, AEx db [ia Ga] IIC T4 Gb

    Increased Safety “eb”

    &

    Encapsulation “mb”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-18: 2019 Ed. 4

    Ex eb mb IIC T4 Gb

    Class I, Zone 1, AEx eb mb IIC T4 Gb

    OR

    Zone 1, AEx eb mb IIC T4 Gb

    Flame-proof “db”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-1:2016 Ed. 3

    UL 60079-0:2019 Ed. 7

    UL 60079-1:2015 Ed. 7

    Ex db IIC T4 Gb

     

    Class I, Zone 1, AEx db IIC T4 Gb

    OR

    Zone 1, AEx db IIC T4 Gb

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-102

    NEC 2020 (NFPA70)

    Section 505.15 (B)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Electrical Sensors (e.g. Acceleration, Pressure, Temperature, Leakage, Proximity, Density, Ultrasonic, Motion, Vibration, Moisture, Tension, Torque)

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 142: 1987 Ed. 3

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 916:2015 Ed. 5

    UL 61010-1:2019 Ed. 3

    “Zone 2” Hazardous Locations, Standards, Common Protection Techniques, and Sample Markings

     

    Intrinsic Safety “ic”

    &

    Increased safety “ec”

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-11: 2018 Ed. 6

    Ex ec ic IIC T4 Gc

    Class I, Zone 2, AEx ec ic IIC T4 Gc

    OR

    Zone 2, AEx ec ic IIC T4 Gc

    Increased Safety “ec”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    Ex ec IIC T4 Gc

    Class I, Zone 2, AEx ec IIC T4 Gc

    OR

    Zone 2, AEx ec IIC T4 Gc

    Increased Safety “ec”

    &

    Encapsulation “mc”

     

    CSA C22.2 No.60079-0:2019 Ed. 4

    CSA C22.2 No.60079-7:2016 Ed. 2

    CSA C22.2 No. 60079-18: 2016 – Ed. 2

    UL 60079-0:2019 Ed. 7

    UL 60079-7:2017 Ed. 5

    UL 60079-18: 2019 Ed. 4

    Ex ec mc IIC T4 Gc

    Class I, Zone 2, AEx ec mc IIC T4 Gc

    OR

    Zone 2, AEx ec mc IIC T4 Gc

    Installation Requirements

    CEC 2018

    Section 18 – Rules 18-150

    NEC 2020 (NFPA70)

    Section 505.15 (C)

    Accredited Certification Agencies in North America

    Canadian Standards Association (CSA)

    Underwriters Laboratories (UL)

    QPS Evaluation Services (QPS)

    FM Approvals (FM)

    -

    Intertek (ETL)

    NOTE - All the above listed agencies are accredited by OSHA and SCC and they can provide certification services for both Canada and the USA.

    Gas Groups

    IIC

    Acetylene

    IIB + H2

    Hydrogen

    IIB

    Ethylene

    IIA

    Propane

    Temperature Classes

    T6

    85°C

    T5

    100°C

    T4

    135°C

    T3

    200°C

    T2

    300°C

    T1

    450°C

    NOTE: Hazcon Inc. grants permission to reproduce this copyrighted material without limitation, subject to the inclusion of the following statement:  The information in this table was assembled by Hazcon Inc., 2020, Toronto Ontario Canada.

    Equipment

    Surge Protectors

    North America

    CANADA

    USA

    Ordinary Location Standards

    CSA C22.2 No. 61010-1:2017 Ed. 3

    UL 61010-1:2019 Ed. 3

    “Class I, Division 1” Hazardous Locations, Standards, Common Protection Technique, and Sample Markings

    Class I, Division 1, Groups A, B, C, D; T4

    (Intrinsic Safety)

    CSA C22.2 No. 157- 1992 Ed. 3

    CSA C22.2 No. 60079-11: 2014 Ed. 2

    UL 913- 2019 Ed. 8

    UL 60079-11: 2018 Ed. 6